Quick Tips to Finding Hidden Piping and Valves
If you are a homeowner then you need to know the details of your home like the back of your hand. It is important to ensure that you are keen as well and are able to know where things like gas piping as well as valves are so that you are able to switch them off in case of an emergency. Below are some of the ways that you can be able to find out where the various valves are located.
In order to locate the gas shutoff valve then you need to find out if you have natural gas since the shutoff valve will be located outside the home just before the gas meter. The nub is usually rectangular in shape and uses a wrench but for the most part gas companies usually do not recommend interfering with this valve. A second valve is usually located further down the line or where the gas pipe first enters.
Modern homes usually have gas pipes that are made from a flexible copper pipe and the pipe runs from outside the house into your utility room. Having such a piping usually means that you have a high-pressure gas system for your home. Such gas systems usually have the shutoff valve near the water heater or the furnace.
When it comes to water meters, you will likely have two shutoff valves one before and the other after the meter as shown on this homepage. In environments where it is really cold you are most likely to get the shut off points located in the house to prevent freezing. There is a high chance that if you live in milder climates, then the water shutoff valve will be located in an underground box with a lid or next to an exterior wall.
If you are finding it hard to find the valves then consider looking at property reports that you got at the last phase of the property purchase. It is important to look keenly at the report since it will show you where the valve is located. With the report, you are able to see the picture of the valves so that you are able to know how they look like so that you can shut them off.
With most automatic sprinklers located underground, there is a very high chance that they may be a little bit harder to find. Since such valves usually have metals then you can easily find them by using a metal detector. Even though such valves may not be located exactly where the plans says using the plans is something that will definitely help you to find out where you need to start.